The SF6 purity analyzer is mainly used to detect SF6 gas purity (percentage) in SF6 and air or SF6 and N2 mixed gas.
SF6纯度分析仪主要用于检测SF6与空气或SF6与N2混合气体中的SF6气体纯度(既百分含量)。
The instrument adopts advanced micro thermal conductivity cell with temperature compensation, which can measure the purity of SF6 quickly and accurately, and the service life can reach ten years.
该仪器采用先进的带温度补偿的微型热导池,可快速准确地测出SF6纯度，寿命可达十年。
The long-life micro thermal conductivity sensor with temperature compensation detects the purity of SF6 gas, which not only solves the problem of temperature drift (that is, the results of detecting the same gas at different ambient temperatures vary greatly), but also is not affected by ambient temperature, with higher accuracy and better stability.
带温度补偿的长寿命微型热导传感器检测SF6气体纯度，不但解决温漂问题(即在不同环境温度下检测同一气体其结果相差很大)，而且不受环境温度影响，精度更高，稳定性更好。
The quality acceptance and assessment during the installation and maintenance of SF6 purity analyzers is not only a major project, but also a reliable basis for internal troubleshooting.
SF6纯度分析仪的安装和维护过程中的质量验收及评定不仅是一个重大的项目，也有可靠的根据内部故障排除。
According to the change in gas purity, it is possible to determine whether there is any serious failure of the equipment.
根据气体纯度的变化，就可以判断是否设备有任何严重的故障。
In the IEC Code's inspection and use guidelines for sulfur hexafluoride (SF6) electrical equipment and specification reuse, purity is listed as SF6 fresh gas detection items, equipment acceptance and preventive testing and maintenance.
在IEC规程的检查和使用指南中六氟化硫(SF6)电气设备和规范再利用，纯度被列为SF6新鲜气体检测项目、设备验收及预防性试验和维护。
The SF6 purity analyzer quickly and accurately detects the percentage showing the total amount of impurities in the SF6 gas.
SF6纯度分析仪快速准确地检测到的百分比显示在SF6气体中的杂质总量。
Its performance is tested by the Institute of Metrological Sciences.
由计量科学研究院检验它的性能。
SF6 Purity analyzer Heat conduction principle for purity detection.
SF6纯度分析仪纯度检测适用的热传导原理。
The SF6 detector uses an advanced thermal conductivity sensor and is currently used in the industry.
SF6检测仪采用了先进的热导传感器，目前在行业应用。
It is a constant temperature and thermal isolation heat sensor.
这是一个恒定的温度和热隔离的热传感器。
It features highly accurate temperature control, as well as pressure and temperature compensation to ensure excellent stability and accuracy of the detected data.
它具有高度准确的温度控制，以及压力和温度补偿，以确保优异的稳定性和准确度检测到的数据。
This device is widely used to check the purity of SF6 gas in SF6 equipment (cables, switches), and can also be used in applications where several background gases are present.
本设备广泛应用于检查SF6设备(电缆、开关)中的SF6气体纯度，也能用于存在有几种背景气体的应用中。
